Weigher Conveyor, Fukui North America

Home
Nursery
Oysters
Mussels
Clams
Scallops
Packaging

Multi-Species Marine Traps
Finfish
Netting
Fencing
Used Aquaculture & Processing Machinery
Consulting
Technical Articles
Polyculture

Distributors
Shellfish Recipes
Fukui's Monthly News Letter

Weigher/Conveyor P-100

Description:
Infeed hopper 12 gauge stainless steel sheet, side rails 12 ga SS sheet, with clean-out openings, carry-way NOLU tee top 1 1/4" return way, NOLU tee top 1 1/4", belt 4" x 3"-ply black, flights 1" high on 3" centers (dribble), stainless. 12" x 3"-ply black flights 1 1/2" high on 12" center (main), caster COLSEN rigid 2" x 6" (2), discharge hopper of 14 ga SS sheet mounted on load cells, gate pneumatically operated drives, Browning gear reduceer with Lesson 1/2 HP (1) and 0.75 HP (1) TEFC motors (dribble and main respectively) weighing, Toledo load cells (2), Lynx programable panel, preset to 2, 5 and 10 lbs material, all type 316
Dimensions:
43.18cm x 2.74m, (17" x 9'long).
Use:
To deliver shellfish to a packaging line in weighed lots.
How it is used / deployed:
1) Shellfish are loaded into the infeed hopper. 2) During bulk fill of weigh hopper, both the main and dribble belt run until set point one is reached at a pre-determined setting below the final desired weight. 3) After set point one is reached, then the main belt stops and the dribble belt operates until the final desired weight is reached (note 2lb operated on dribble only). 4) A switch on front of the control pannel allows for quick change between weights.
Features / benefits:
5 or 10 lb may be manually re-pprogrammed as requred, as long as the first setting is lower than the second.
Manufactured in Canada.

To receive a quote on this product,
please fill out our quote request form.

Fukui North America

110-B Bonnechere St.W.
Eganville, Ontario K0J 1T0
CANADA
Email: don@bishopaquatic.com or call 613-639-3474